The distance between Jervis Bay and Port Macquarie is around 512km (318 miles) and the quickest way to get there is to take the train and then fly which takes around 4h 50m.
We've found 4 different ways to get from Jervis Bay to Port Macquarie by bus, car, train and plane. The recommended routes, which include information on duration, ticket price, and level of difficulty, can be found below.
👋 Also check out Port Macquarie → Jervis Bay if you're planning a return trip.
Take the train to Wolli Creek Station then fly from Sydney (SYD) to Port Macquarie (PQQ).
Multiple operators
1 similiar route
We’ve grouped similar routes together, click the arrows to see the other options.
Take the bus to Sydney and then to Port Macquarie.
Multiple bus operators
There are several options for getting from Jervis Bay to Port Macquarie by bus, car, train and plane. The cheapest option is to take the bus which costs around A$110 ($75) and will take around 9h 60m. If you need to get there more quickly, you can take the train and then fly and arrive in approximately 4h 50m, though it is a bit more costly at approximately A$205 ($140).
The distance between Jervis Bay and Port Macquarie is around 512km (318 miles). In a direct line (as the crow flies), the distance is 461km (287 miles)
It takes around 9h 60m to get from Jervis Bay and Port Macquarie by bus. If you are travelling by car it will take around 6h 20m to drive there.
The quickest way to get from Jervis Bay to Port Macquarie is to take the train and then fly which takes around 4h 50m and will set you back approx A$205 ($140).
The cheapest way to travel between Jervis Bay and Port Macquarie, if you exclude driving, is to take the bus which will typically cost around A$110 ($75) for a standard one-way ticket.
There is no train service that runs between Jervis Bay and Port Macquarie. We recommend that you take the train to Wolli Creek Station then fly from Sydney (SYD) to Port Macquarie (PQQ). instead which will take 4h 50m.
Yes there is a bus that runs regularly from Jervis Bay and Port Macquarie. It typically takes around 9h 60m and departs once daily.
There are no direct bus services that runs from Jervis Bay to Port Macquarie. However, you can instead can take several connecting buses with changeovers in Huskisson Shops Owen St, Bomaderry Station and Sydney. These services run once daily and will take a minimum of 9h 60m.
Premier Motor Service and Greyhound Australia run regular bus services between Jervis Bay and Port Macquarie. Buses run once daily and take around 9h 60m on average but will vary depending on you book with.
It doesn't look like you can fly directly from Jervis Bay to Port Macquarie. We recommend that you take the train to Wolli Creek Station then fly from Sydney (SYD) to Port Macquarie (PQQ). instead which will take 4h 50m.
The closest major airport to Port Macquarie is Port Macquarie Airport (PQQ) (PQQ) which is approximately 4km (3 miles) from Port Macquarie. Coffs Harbour Airport (CFS) (CFS) and Sydney Airport (SYD) (SYD) are also nearby and might be a better alternative airport depending on where you are flying from.
Yes it is possible to drive from Jervis Bay and Port Macquarie. The distance is around 558km (347 miles) by road and it will take around 6h 20m in normal traffic conditons.
If you don't have a car, the easiest way to get from Jervis Bay to Port Macquarie is to take the bus which takes, on average, 9h 60m and will usually cost around A$110 ($75).
Transport option | Duration | Cost | Frequency | Distance |
---|---|---|---|---|
Train and Plane + 1 similar | 4h 50m | A$205($140) | every 4 hours | 512km (318 miles) |
Bus and Plane | 5h 55m | A$295($200) | 4 times a week | 739km (459 miles) |
Bus | 9h 60m | A$110($75) | once daily | 609km (378 miles) |
Drive | 6h 20m | A$74($50) | on demand | 558km (347 miles) |
Transport NSW
NSW TrainLink
Regional Express
Qantas
Premier Motor Service
The following major airports near Port Macquarie offer regular flights to various popular destinations within Australia and internationally.