The distance between Prague and Špindlerův Mlýn is around 145km (90 miles) and the quickest way to get there is to drive which takes around 1h 50m.
We've found 4 different ways to get from Prague to Špindlerův Mlýn by bus, train and car. The recommended routes, which include information on duration, ticket price, and level of difficulty, can be found below.
👋 Also check out Špindlerův Mlýn → Prague if you're planning a return trip.
Take the bus to Tanvald.
1 similiar route
We’ve grouped similar routes together, click the arrows to see the other options.
Take the train to Chlumec Nad Cidlinou and then to Martinice V Krkonosich.
There are several options for getting from Prague to Špindlerův Mlýn by bus, train and car. The cheapest option is to take the bus which costs around CZK 295 ($12) and will take around 3h 30m. If you need to get there more quickly, you can drive and arrive in approximately 1h 50m, though it is a bit more costly at approximately CZK 420 ($17).
The distance between Prague and Špindlerův Mlýn is around 145km (90 miles). In a direct line (as the crow flies), the distance is 110km (68 miles)
It takes around 2h 45m to get from Prague and Špindlerův Mlýn by bus. If you are travelling by car it will take around 1h 50m to drive there.
The quickest way to get from Prague to Špindlerův Mlýn is to drive which takes around 1h 50m and will set you back approx CZK 420 ($17).
The cheapest way to travel between Prague and Špindlerův Mlýn, if you exclude driving, is to take the bus which will typically cost around CZK 295 ($12) for a standard one-way ticket.
Yes there is a train service that runs between Prague and Špindlerův Mlýn. It typically takes around 3h 10m and departs every 4 hours.
There are no direct train services that runs from Prague to Špindlerův Mlýn. However, you can instead can take several connecting trains with a changeover in Chlumec Nad Cidlinou and Martinice V Krkonosich. These services run every 4 hours and will take a minimum of 3h 10m.
Czech Railways run train services between Prague and Špindlerův Mlýn. Trains depart every 4 hours and will take around 3h 10m, however, this may vary depending on the particular service and whether it runs express or stops all stations.
Yes there is a bus that runs regularly from Prague and Špindlerův Mlýn. It typically takes around 2h 45m and departs twice daily.
There are no direct bus services that runs from Prague to Špindlerův Mlýn. However, you can instead can take several connecting buses with changeovers in Tanvald. These services run twice daily and will take a minimum of 2h 45m.
FlixBus and BusLine LK s.r.o. run regular bus services between Prague and Špindlerův Mlýn. Buses run twice daily and take around 2h 45m on average but will vary depending on you book with.
It doesn't look like you can fly directly from Prague to Špindlerův Mlýn. We recommend that you take the bus to Tanvald. instead which will take 2h 45m.
The closest major airport to Špindlerův Mlýn is Prague Václav Havel Airport (PRG) (PRG) which is approximately 117km (73 miles) from Špindlerův Mlýn. Turany Airport (BRQ) (BRQ) and Mosnov Airport (OSR) (OSR) are also nearby and might be a better alternative airport depending on where you are flying from.
Yes it is possible to drive from Prague and Špindlerův Mlýn. The distance is around 145km (90 miles) by road and it will take around 1h 50m in normal traffic conditons.
If you don't have a car, the easiest way to get from Prague to Špindlerův Mlýn is to take the bus which takes, on average, 2h 45m and will usually cost around CZK 2,235 ($90).
Transport option | Duration | Cost | Frequency | Distance |
---|---|---|---|---|
Bus + 1 similar | 2h 45m | CZK 2,235($90) | twice daily | 169km (105 miles) |
Bus to Vítkovice,Horní Mísečky | 3h 30m | CZK 295($12) | twice daily | 159km (99 miles) |
Train | 3h 10m | CZK 1,350($55) | every 4 hours | 181km (112 miles) |
Drive | 1h 50m | CZK 420($17) | on demand | 145km (90 miles) |
BusLine LK s.r.o.
The following major airports near Špindlerův Mlýn offer regular flights to various popular destinations within Czechia and internationally.